WhatsApp: +8618124018244描述
Antminer T17 Refit Upgraded Heat sinks NBTC
The effect is better, the weight is lighter, and the modification success rate is higher!
Product Description
How we compare to other suppliers
Why choose us?
1. Upgrade the manufacturer of the heat sink kit, the technology is mature and professional, and the effect is better;
2. Several improvements are made to maintain its optimal cooling performance, and electrostatic coating is used to protect the
circuit;
3. At present, we have upgraded 50000+ S17 (series machines) with a success rate of 98%;
4. We are a brand product with technical support, and we are more assured after sales.
| No. | Real Support Electronic Co.,Ltd (NBTC) | Other supplier |
| Name | S17 series heat sink | S17 series heat sink |
| Size | 2-3 pcs of each board fit perfectly | 1 pcs of each board heavy and big |
| Easy to operate | Simple and convenient, professional aids | Difficult to use difficult to replace |
| Brand | NBTC： professional brand guaranteed quality good after-sales service | No brand: difficult to guarantee after sale |
| Status | original heat sink manufacturer | Imitation |
| Advantage | 1.The latest version after many improvements, Good cooling effect 2. High success rate of modification with insulating coating | 1.Poor heat dissipation 2.no insulation 3. the larger the metal, the easier it is to deform, causing the heat sink and the chip not to fit together, and the chip temperature is too high. |
As we know, the larger the metal, the easier it is to deform. If the heat sink was a whole big board, it won`t fit all the chips closely when using, and the chips temperature will getting higher, usually after 5 minutes according to our test & customer’s feedback who back to buy from us again.
Refit heat sinks of S17 series miners
SOP(Standard Operating Procedure) – Easy to go
1. Remove heat sinks
2. Remove the tin on chips
3. Clean the dust
4. Clean the pad
5. Fix the tinned screw nut
(smaller hole side down ) on pad
6. Fix the heat sink plate on board(Thermal paste / pad on it –
Put it on board – Set the washer – Screw
